MD + MM Editor

Appendix B: MIDI control reference

The Machinedrum is played and edited over MIDI. This chapter says which notes play which track and pattern, which control changes move the sound parameters, and which move the level and the mute of a track. The editor keeps to the machine's own messages, so a keyboard or a DAW that plays the machine plays the editor.

NOTE MAP #

MD manual pp.B-1

By default the 16 tracks answer to the white keys from C2 to D4, one note a track, on the four channels from the base channel. The 128 patterns answer to notes from E4 upwards, one note a pattern.

To see or change the map:

  1. Choose GLOBAL… in the engine menu.
  2. Find the map editor in the panel. Each track has a note.
  3. Click the note of a track up or down. The track plays from the next note.
  4. Click a track's LEARN dot to set the note by playing it. The head of the panel asks you to play a note. Play it on a MIDI keyboard. The track takes that note and the dot goes out.
  5. Click Reset map. The editor asks first. Answer, and the tracks play from C2 and the patterns from E4 again.
  6. Press [ESC] to close the panel.

CONTROL CHANGES #

MD manual pp.B-1

The sound parameters of the 16 tracks are reached by control change messages. The machine uses four MIDI channels, starting from its base channel, and each channel serves a group of four tracks. Every parameter of a track has its own control change number.

In the editor you do not type these numbers. When you move a value on the Kit workspace, the editor sends the control change for it. A move on a track of each group of four, tracks 1, 5, 9 and 13, reaches the machine through its own channel.

A DAW reaches the same parameters by host automation. Each track has host parameters for synthesis, effects, routing, level and mute, and a lane of automation sends the control change the knob would send.

A controller knob learned on the Control tab (chapter 17) takes over its control change on its channel: the machine's own target of that number no longer moves.

LEVEL AND MUTE #

MD manual pp.B-1

Each track has its own control change for its level. The mute of a track is a control change of its own too.

  1. Click the Mix tab.
  2. Drag the <LEV> box of a track. The level control change goes out with each move.
  3. Double-click the box. It reads 100.
  4. Click Undo until the level is back.

The mute keys of the editor act on the machine's own memory of the mutes.

PROGRAM CHANGE #

A program change on one of the four channels selects a pattern when Prg change in is ON (chapter 10). With Prg change out ON the machine sends one when you choose a pattern.

MIDI OUT #

The machine's MIDI out carries notes, controllers, program changes, pitch bend, pressure, clock, start, stop and continue. It never carries SysEx.