MD + MM Editor

Appendix C: sysex reference

The Machinedrum is also edited by system exclusive messages. A message has a number, which the machine's own appendix lists in hexadecimal. A dump carries a whole object, a kit, a pattern, a song or a global. A request asks the machine for one. The other messages change one thing, such as a tempo or a routing.

You never send these by hand. The editor sends and reads them for you, and this chapter says where. The numbers are written for reference.

KITS #

MD manual pp.C-1

A kit dump is 0x52 and its request 0x53. The kit library and the whole page use them. A kit moves between the editor and the machine as a dump.

Set kit name is 0x55. Rename in the kit library sends it.

To see the kit messages work:

  1. Click <KIT> on the LCD. The kit library opens.
  2. Alt-click a slot. It is selected, not loaded.
  3. Click Copy, Alt-click another slot and click Paste. Answer Overwrite when the editor asks. Press [⌘] + [Z] and the slot is back as it was.
  4. Double-click the current kit, type a name and press [Enter]. The working kit is renamed and not saved yet.
  5. Click Save. The slot holds the new name.

GLOBALS #

MD manual pp.C-1

A global dump is 0x50 and its request 0x51. The GLOBAL panel shows the global the machine reported: its slot, its base channel and its sync settings.

Set active global is 0x56. The slot keys in the GLOBAL panel send it.

  1. Choose GLOBAL… in the engine menu.
  2. Click another global slot key. The active global of the machine is that one.
  3. Click the key of the first slot again to put it back.

LOADING AND SAVING #

MD manual pp.C-2, C-3

Load pattern is 0x57, load kit is 0x58 and save kit is 0x59. The pattern chooser and the kit library send them.

Save song is 0x6d. Save in the Songs column sends it.

  1. Click <KIT> on the LCD. Click another kit. It loads at once.
  2. Alt-click a third kit. It is selected, not loaded.
  3. Click Save as. The editor asks before it overwrites. Click Overwrite and the kit is saved into that slot.
  4. Click the pattern on the LCD, then another pattern. With the machine stopped, it switches.

NOTE MAP #

MD manual pp.C-2, C-3

Set MIDI note mapping is 0x5a. The map editor in the GLOBAL panel sends it when you change the note of a track.

Reset MIDI note map is 0x64. Reset map sends it. The editor asks first, and [⌘] + [Z] takes it back.

SOUND SETTINGS #

MD manual pp.C-2, C-3

These messages change one part of the sound.

  • Assign machine is 0x5b. The machine picker on the Kit workspace sends it.
  • Set track routing is 0x5c. The OUT key of a track on the Mix workspace sends it, and so does the routing in the GLOBAL panel.
  • The Rhythm Echo, Gate Box, Master EQ and Dynamix messages are 0x5d to 0x60. The cards of the Mix workspace send them.
  • Set tempo is 0x61. Dragging the <TEMPO> field in the LCD sends it.
  • Set LFO is 0x62. The LFO cards of the Kit workspace send it.
  • Trig group is 0x65 and mute group is 0x66. Mute and Trig in the relations of the Kit workspace send them.

PATTERNS AND SONGS #

MD manual pp.C-3

Pattern dump is 0x67 and its request 0x68. The editor uses them for the whole page, and the pattern chooser shows what they hold.

Song dump is 0x69 and its request 0x6a. Load song is 0x6c. The Song workspace uses them. A song slot you click is only selected. Load puts the machine's song in the editor.

Status request, set and response are 0x70 to 0x72. The editor reads the machine's mode with them. Click <PLAY> on the second line of the LCD and the machine's mode is SONG. Click it again to go back to PATTERN.

NOT IN THE EDITOR #

MD manual pp.C-3, C-4

Set receive position is 0x6b. The editor does not send it. When you import a SysEx file, the editor places the items itself.

The TurboMIDI speed messages are 0x10 to 0x17. They belong to the hardware link and the editor has no control for them.